Product Highlights

• Zenmuse Z15-GH4 (HD) Gimbal for GH4/GH3
• Gimbal Provides 360° Camera Rotation
• Collapsible Frame and Folding Props
• HDMI Output for Lightbridge System
• Up to 18 Pound Total Take-Off Weight
• Low Gimbal Mounting with Dampening
• Retractable Landing Gear
• DJI A2 Flight Control System
• Supports Futaba FASST / DJI DESST Radios
• Up 18 Minutes Flying at 12,000mAh

• DJI Spreading Wings S900 Hexacopter

  Frame
  Diagonal Wheelbase	35.4" / 900 mm
  Frame Arm Length	14.1 / 358 mm
  Frame Arm Weight	Including Motor, ESC, and Propellers: 11.1 oz / 316 g
  Center Frame Diameter	10.7" / 272 mm
  Center Frame Weight	With Landing Gear Mounting Base and Servos: 2.6 lb / 1.2 kg
  Landing Gear Dimensions	18.1 x 17.7 x 14.2 / 460 x 450 x 360 mm

  Motor
  Stator Size	1.6 x 0.6" / 41 x 14 mm
  Motor Velocity Constant	KV: 400 rpm/V
  Maximum Power Consumption	500 W
  Weight	With Cooling Fan: 5.6 oz / 158 g

  Electronic Speed Control (ESC)
  Working Current	40 A
  Working Voltage	6S LiPo
  Signal Frequency	30 to 450 Hz
  Drive PWM Frequency	8 kHz
  Weight	With Cooling Fan: 1.2 oz / 35 g

  Propeller
  Type	Folding
  Material	Plastic
  Size	15 x 5.2" / 381 x 132 mm
  Weight	0.5 oz / 13 g

  Flight Parameters
  Supported Flight Control Systems	DJI A2 and WooKong-M
  Take-Off Weight	10.4 to 18.1 lb / 4.7 to 8.2 Kg
  Total Weight	7.3 lb / 3.3 Kg
  Battery Requirements	LiPo: 6S, 10000 to 15000 mAh, 15C (minimum)
  Maximum Power Consumption	3000 W
  Hover Power Consumption	1000 W at 15 lb / 6.8 Kg takeoff weight
  Hover Time	18 minutes at 12000 mAh and 15 lb / 6.8 Kg takeoff weight
  Operating Temperature	14 to 104°F/ -10 to 40°C

  Packaging Info
  Box Dimensions (LxWxH)	19.8 x 15.7 x 12.7"

• DJI A2 Flight Control System for Multi-Rotor Aircraft

  Supported ESC Output	400 Hz refresh frequency
  Supported Transmitters	With Built-in Receiver: Futaba FASST series and DJI DESST series
  Supported External Receivers	Futaba S-Bus, S-Bus2, DSM2
  Other DJI Products Supported	Z15, H3-2D, iOSD, 2.4G Bluetooth Data Link, and S800 EVO
  Hovering Accuracy (GPS Mode)	Vertical: ±1.6' / 0.5 m Horizontal: ±4.9' / 1.5 m
  Maximum Wind Resistance	< 26.2 fps (8 m/s) / 17.9 mph (28.8 km/h)
  Maximum Yaw Angular Velocity	150 deg/s
  Maximum Tilt Angle	35°
  Ascent/Descent	±19.7 fps / 6 m/s
  Power Requirements	Maximum: 5 W Typical: 0.3 A at 12.5 V
  System Requirements	Assistant Software: Windows 8, 7, or XP SP3 -- 32 or 64-bit
  Operating Temperature	23 to 140°F / -5 to 60°C
  Dimensions	Flight Controller: 2.1 x 1.5 x 0.6" / 54 x 39 x 14.9 mm IMU: 1.6 x 1.2 x 1" / 41.3 x 30.5 x 26.3 mm GPS-Compass Pro: 2.4" (diameter) x 0.6" / 62 mm (diameter) x 14.3 mm LED-BTU-I: 1.2 x 1.2 x 0.3" / 30 x 30 x 7.9 mm PMU: 39.5mm x 27.6mm x 9.8mm
  Weight	Overall: 7.9 oz / 224 g

  Packaging Info
  Box Dimensions (LxWxH)	6.9 x 4.7 x 2.7"

• DJI Zenmuse Z15-GH4 HD 3-Axis Gimbal for Panasonic GH3/GH4

  Supported Camera	Panasonic GH4/GH3
  Supported Lens	Olympus M.ZUIKO DIGITAL ED 12mm f/2.0 Lens Warning! Using other lenses may damage the servo motors
  Control Requirements	At least four spare receiver channels (or use dedicated transmitter for two person operation)
  Software Requirements	For Assistant Software: Windows 8, 7, XP SP3 -- 32 or 64-bit
  Working Current	Static Current: 200 mA at 25 V Dynamic Current: 400 mA at 25 V Locked-Rotor Current: 4 A at 25 V
  GCU BEC Output	10 A at 12 V
  Transmit Power	GCU Wireless Video Transmission: 1 A at 12 V
  Controlled Angle Accuracy	±0.05°
  Maximum Controlled Rotation Speed	Pan Axis: ±130°/s Tilt Axis: ±130°/s Roll Axis ±30°/s
  Controlled Rotation Range	Pan Axis Control: ±360° Tilt Axis Control: +50° / -140° Roll Axis Control: ±40°
  Power Requirements	GCU: 4S to 12 S lithium polymer (6S recommended for S800 EVO and S1000)
  Operating Temperature	14 to 122°F / -10 to 50°C
  Dimensions	GCU: 2.5 x 1.4 x 0.8" / 64.2 x 34.1 x 19.5 mm
  Weight	Gimbal: 2.7 lb / 1.2 kg GCU: 2.2 oz / 63 g

  Packaging Info
  Box Dimensions (LxWxH)	9.9 x 9.4 x 9.4"