Log in Register

Login to your account

Username *
Password *
Remember Me

Create an account

Fields marked with an asterisk (*) are required.
Name *
Username *
Password *
Verify password *
Email *
Verify email *

Cart

Cart empty
Home Product Categories Drone DJI Spreading Wings S1000+ Octocopter with Zenmuse Z15-A7, A2, Transmitter Batteries, and Case Kit
DJI Phantom 4 Quadcopter Kit with Two Spare BatteriesDJI Spreading Wings S1000+ Professional Octocopter
dji spreading wings s1000+ octocopter with zenmuse z15-a7, a2, transmitter batteries, and case kit
dji spreading wings s1000+ octocopter with zenmuse z15-a7, a2, transmitter batteries, and case kit.2
dji spreading wings s1000+ octocopter with zenmuse z15-a7, a2, transmitter batteries, and case kit.3
dji spreading wings s1000+ octocopter with zenmuse z15-a7, a2, transmitter batteries, and case kit.4
dji spreading wings s1000+ octocopter with zenmuse z15-a7, a2, transmitter batteries, and case kit.5
dji spreading wings s1000+ octocopter with zenmuse z15-a7, a2, transmitter batteries, and case kit.6

DJI Spreading Wings S1000+ Octocopter with Zenmuse Z15-A7, A2, Transmitter Batteries, and Case Kit

PDFPrint
Rating: 3/5
Price:
USD 2,533.00
on-order.gif
Ask a question about this product

Description

Product Highlights

• Z15 3-Axis Gimbal for Sony a7S / a7R
• DJI A2 Flight Control System
• Futaba 14SGH 14-Channel Transmitter
• Collapsible Frame and Folding Props
• Up to 24 Pound Take-Off Weight
• Low Gimbal Mounting with Dampening
• Retractable Landing Gear
• One-Motor Failure Survivability
• Two 13,000mAh Flight Batteries
• Watertight Hard Case

  • DJI Spreading Wings S1000+ Professional Octocopter
    Performance
    Takeoff Weight 13.2 lb / 6 kg to 24.2 lb / 11 kg
    Motor
    Stator Size 1.6 x 0.6" / 41 x 14 mm
    Motor Velocity Constant KV: 400 rpm/V
    Maximum Power 500 W
    Weight With Cooling Fan: 5.6 oz / 158 g
    Electronic Speed Control (ESC)
    Working Current 40 A
    Working Voltage 6S LiPo
    Signal Frequency 30 to 450 Hz
    Drive PWM Frequency 8 kHz
    Weight 1.2 oz / 35 g
    Propellers
    Size 15 x 5" / 38.1 x 12.7 cm
    Weight 0.5 oz / 13 g
    Frame
    Diagonal Wheelbase 41.1" / 1045 mm
    Frame Arm Length 15.2" / 386 mm
    Center Frame Diameter 13.3" / 337 mm
    Center Frame Weight With Landing Gear Mounting Base, Servos: 3.3 lb / 1.5 kg
    Landing Gear Size 18.1 x 20.1 x 12" / 460 x 511 x 305 mm
    Flight Control System
    Compatibility A2 or WooKong-M
    Gain Value Settings For A2 Flight Controller
    Basic: Roll 120%, Pitch 120%, Yaw 120%
    Attitude: Roll 170%, Pitch 170%, Vertical 120%

    For WooKong-M Flight Controller
    Basic: Roll 130%, Pitch 130%, Yaw 120%
    Attitude: Roll 180%, Pitch 180%, Vertical 120%
    General
    Power Requirements Lithium-Polymer (LiPo):
    Power Consumption Maximum: 4000 W
    Hovering: 1500 W at 20.9 lb / 9.5 kg takeoff weight
    Operating Temperature 14 to 104°F / -10 to 40°C
    Weight 9.7 lb / 4.4 kg
    Packaging Info
    Box Dimensions (LxWxH) 20.1 x 17.8 x 11.6"
  • DJI A2 Flight Control System for Multi-Rotor Aircraft
    Supported ESC Output 400 Hz refresh frequency
    Supported Transmitters With Built-in Receiver: Futaba FASST series and DJI DESST series
    Supported External Receivers Futaba S-Bus, S-Bus2, DSM2
    Other DJI Products Supported Z15, H3-2D, iOSD, 2.4G Bluetooth Data Link, and S800 EVO
    Hovering Accuracy (GPS Mode) Vertical: ±1.6' / 0.5 m
    Horizontal: ±4.9' / 1.5 m
    Maximum Wind Resistance < 26.2 fps (8 m/s) / 17.9 mph (28.8 km/h)
    Maximum Yaw Angular Velocity 150 deg/s
    Maximum Tilt Angle 35°
    Ascent/Descent ±19.7 fps / 6 m/s
    Power Requirements Maximum: 5 W
    Typical: 0.3 A at 12.5 V
    System Requirements Assistant Software: Windows 8, 7, or XP SP3 -- 32 or 64-bit
    Operating Temperature 23 to 140°F / -5 to 60°C
    Dimensions Flight Controller: 2.1 x 1.5 x 0.6" / 54 x 39 x 14.9 mm
    IMU: 1.6 x 1.2 x 1" / 41.3 x 30.5 x 26.3 mm
    GPS-Compass Pro: 2.4" (diameter) x 0.6" / 62 mm (diameter) x 14.3 mm
    LED-BTU-I: 1.2 x 1.2 x 0.3" / 30 x 30 x 7.9 mm
    PMU: 39.5mm x 27.6mm x 9.8mm
    Weight Overall: 7.9 oz / 224 g
    Packaging Info
    Box Dimensions (LxWxH) 6.9 x 4.7 x 2.7"
  • DJI Zenmuse Z15-A7 3-Axis Gimbal for Sony a7S / a7R
    Peripheral
    Supported Camera Sony a7S / a7R
    Supported Lens Sony FE 35mm f/2.8 ZA
    Control Requirements At least 4 spare receiver channels
    S-Bus/PPM receiver supported
    Software Requirements For Assistant Software: Windows 8, 7, XP SP3 -- 32 or 64-bit
    Electrical Characteristics
    Working Current Static Current: 200 mA at 25 V
    Dynamic Current: 400 mA at 25 V
    Locked-Rotor Current: 4 A at 25 V
    GCU BEC Output 10 A at 12 V
    Transmit Power GCU Wireless Video Transmission: 1 A at 12 V
    Performance
    Load Weight (Reference Value) 1.4 lb / (622 g) with Sony a7S, FE 35mm f/2.8 ZA lens, battery, lens hood, and SD Card
    1.3 lb (580 g) with Sony a7SR, FE 35 mm f2.8 ZA lens, battery, lens hood, and SD Card
    Controlled Angle Accuracy ±0.01°
    Maximum Controlled Rotation Speed Pan Axis: ±130°/s
    Tilt Axis: ±130°/s
    Roll Axis ±30°/s
    Controlled Rotation Range Pan Axis Control: ±360° continuous rotation
    Tilt Axis Control: +50°:/-140°
    Roll Axis Control: ±40°
    General
    Power Requirements GCU: 4S to 12 S LiPo (6S if using S800, S1000+)
    Operating Temperature 14 to 122°F (-10 to 50°C)
    Dimensions Gimbal: 8.7 x 8.7 x 7.5" (220 x 220 x 190 mm)
    Camera Frame Dimensions: 5.6 x 3" (142 x 76 mm)
    GCU: 2.5 x 1.4 x 0.8" (64.2 x 34.1 x 19.5 mm)
    Weight Gimbal: 2.9 lb (1.3 kg)
    GCU: 2.2 oz (63 g)
    Packaging Info
    Box Dimensions (LxWxH) 10.0 x 9.449 x 9.37"
  • 2 x Venom Group 13,000mAh Professional DRONE LiPo Battery with XT150 & AS150 Connectors (22.2V)
    Battery Information
    Application/Usage Drone
    Battery Rechargeable Yes
    Battery Size Proprietary Battery Size
    Battery Chemistry Lithium Polymer (Li-Polymer)
    Battery Capacity 13000 mAh
    Output Voltage 22.2 V DC

    Social Links

     

    Simpan