Cart

Cart empty

dji spreading wings s1000+ with z15-5diii (hd) gimbal and a2 flight controller
dji spreading wings s1000+ with z15-5diii (hd) gimbal and a2 flight controller.2
dji spreading wings s1000+ with z15-5diii (hd) gimbal and a2 flight controller.3

DJI Spreading Wings S1000+ with Z15-5DIII (HD) Gimbal and A2 Flight Controller

PDFPrint
Rating: 3/5
Price:
USD 2,275.00
on-order.gif

Description

Product Highlights

Zenmuse Z15-5DIII (HD) 3-Axis Gimbal
Gimbal Stabilizes Canon 5DIII DSLR
Collapsible Frame and Folding Props
HDMI Output for Lightbridge System
DJI A2 Flight Control System
Low Gimbal Mounting with Dampening
Retractable Landing Gear
Simpler Flight Controller Installation
2.4 GHz DR16 Radio Receiver
Redesigned Power Distribution

  • DJI Spreading Wings S1000+ Professional Octocopter
    Performance
    Takeoff Weight 13.2 lb / 6 kg to 24.2 lb / 11 kg
    Motor
    Stator Size 1.6 x 0.6" / 41 x 14 mm
    Motor Velocity Constant KV: 400 rpm/V
    Maximum Power 500 W
    Weight With Cooling Fan: 5.6 oz / 158 g
    Electronic Speed Control (ESC)
    Working Current 40 A
    Working Voltage 6S LiPo
    Signal Frequency 30 to 450 Hz
    Drive PWM Frequency 8 kHz
    Weight 1.2 oz / 35 g
    Propellers
    Size 15 x 5" / 38.1 x 12.7 cm
    Weight 0.5 oz / 13 g
    Frame
    Diagonal Wheelbase 41.1" / 1045 mm
    Frame Arm Length 15.2" / 386 mm
    Center Frame Diameter 13.3" / 337 mm
    Center Frame Weight With Landing Gear Mounting Base, Servos: 3.3 lb / 1.5 kg
    Landing Gear Size 18.1 x 20.1 x 12" / 460 x 511 x 305 mm
    Flight Control System
    Compatibility A2 or WooKong-M
    Gain Value Settings For A2 Flight Controller
    Basic: Roll 120%, Pitch 120%, Yaw 120%
    Attitude: Roll 170%, Pitch 170%, Vertical 120%

    For WooKong-M Flight Controller
    Basic: Roll 130%, Pitch 130%, Yaw 120%
    Attitude: Roll 180%, Pitch 180%, Vertical 120%
    General
    Power Requirements Lithium-Polymer (LiPo):
    Power Consumption Maximum: 4000 W
    Hovering: 1500 W at 20.9 lb / 9.5 kg takeoff weight
    Operating Temperature 14 to 104°F / -10 to 40°C
    Weight 9.7 lb / 4.4 kg
    Packaging Info
    Box Dimensions (LxWxH) 20.1 x 17.8 x 11.6"
  • DJI A2 Flight Control System for Multi-Rotor Aircraft
    Supported ESC Output 400 Hz refresh frequency
    Supported Transmitters With Built-in Receiver: Futaba FASST series and DJI DESST series
    Supported External Receivers Futaba S-Bus, S-Bus2, DSM2
    Other DJI Products Supported Z15, H3-2D, iOSD, 2.4G Bluetooth Data Link, and S800 EVO
    Hovering Accuracy (GPS Mode) Vertical: ±1.6' / 0.5 m
    Horizontal: ±4.9' / 1.5 m
    Maximum Wind Resistance < 26.2 fps (8 m/s) / 17.9 mph (28.8 km/h)
    Maximum Yaw Angular Velocity 150 deg/s
    Maximum Tilt Angle 35°
    Ascent/Descent ±19.7 fps / 6 m/s
    Power Requirements Maximum: 5 W
    Typical: 0.3 A at 12.5 V
    System Requirements Assistant Software: Windows 8, 7, or XP SP3 -- 32 or 64-bit
    Operating Temperature 23 to 140°F / -5 to 60°C
    Dimensions Flight Controller: 2.1 x 1.5 x 0.6" / 54 x 39 x 14.9 mm
    IMU: 1.6 x 1.2 x 1" / 41.3 x 30.5 x 26.3 mm
    GPS-Compass Pro: 2.4" (diameter) x 0.6" / 62 mm (diameter) x 14.3 mm
    LED-BTU-I: 1.2 x 1.2 x 0.3" / 30 x 30 x 7.9 mm
    PMU: 39.5mm x 27.6mm x 9.8mm
    Weight Overall: 7.9 oz / 224 g
    Packaging Info
    Box Dimensions (LxWxH) 6.9 x 4.7 x 2.7"
  • DJI Zenmuse Z15-5D III (HD) 3-Axis Gimbal for Canon 5D Mark III
    Compatibility
    Supported Camera Canon EOS 5D Mark III only
    Supported Lens Canon EF 24mm f/2.8 IS USM
    System Requirements
    Control Requirements At least 4 spare receiver channels
    S-Bus/PPM receiver supported
    Software Requirements For Assistant Software: Windows 8, 7, XP SP3 -- 32 or 64-bit
    Power Requirements
    Working Current Static Current: 200 mA at 25 V
    Dynamic Current: 400 mA at 25 V
    Locked-Rotor Current: 4 A at 25 V
    GCU BEC Output 10 A at 12 V
    Performance
    Transmit Power GCU Wireless Video Transmission: 1 A at 12 V
    Controlled Angle Accuracy ±0.02°
    Maximum Controlled Rotation Speed Pan Axis: ±90°/s
    Tilt Axis: ±130°/s
    Roll Axis ±30°/s
    Controlled Rotation Range Pan Axis Control: ±360° continuous rotation
    Tilt Axis Control: +15° / -120°
    Roll Axis Control: ±25°
    Load Weight (Reference Value) 5.9 lb (2.7 kg) with 5D MARK III, SD card, battery, and Canon EF 24mm f/2.8 IS USM lens
    General
    Power Requirements GCU: 4S to 12 S LiPo (6S recommended for S1000)
    Operating Temperature 14 to 122°F (-10 to 50°C)
    Dimensions Gimbal: 11.1 x 9.5 x 8.7" (281 x 242 x 222 mm)
    GCU: 2.5 x 1.4 x 0.8" (64.2 x 34.1 x 19.5 mm)
    Weight Gimbal: 3.4 lb (1.5 kg)
    GCU: 2.2 oz (63 g)
    Packaging Info
    Box Dimensions (LxWxH) 11.7 x 11.4 x 10.3"